Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- en:anleitung:avm-fb-4040 [2020/12/08 19:42] – cleal
+++ en:anleitung:avm-fb-4040 [2025/10/07 20:41] (aktuell) – Verlinkung Captive Portal tweish
@@ Zeile 1: / Zeile 1: @@
 ====== Fritz!Box 4040 ======
-Connect the blue Port on your Router with the included cable to the RJ45 (Ethernet) plug in your wall.
+Connect the blue port on your router with the included cable to the RJ45 (Ethernet) plug in your wall.
 You can now connect to the WiFi that is being transmitted by the Router.
 To do so enter "192.168.128.1" into you browser (i.e. Google Chrome).
-First of all change the available bandwith to make sure QualityOfService is working correctly.
+First of all change the available bandwidth to make sure Quality of Service is working correctly.
-{{:anleitung:fritzbox_4040_qos_bandbreite.png?600|Fritz!Box 4040 QoS Bandbreite jeweils 1000}}
+{{ :anleitung:fritzbox_4040_qos_bandbreite.png?600 |Fritz!Box 4040 QoS Bandbreite jeweils 1000}}
-Determining the MAC Address of your Fritz!Box is a bit more involved.
+The router can subsequently be registered via the [[captive_portal|Captive Portal]].
-Go into the table of contents of your Router by clicking on contents (Inhalt) on the bottom left.
-{{:anleitung:fritzbox_4040_menu_unten_links.png.png|Fritz!Box Menü in der unteren linken Ecke}}
+{{ :anleitung:captive_portal_en.jpg?600 |}}
-{{:anleitung:fritzbox_4040_inhalt.png?600|Inhaltsverzeichnis des Fritz!Box Menüs}}
-On the displayed list choose "Fritz!Box Support".
+**The automatically detected MAC-address has already been filled in. Don't change it!**
-Now you can download the support file.
+If the router has been wired up correctly, that's exactly the MAC address that needs to be registered.
-{{:anleitung:fritzbox_4040_support_datei.png?600|Support Datei download}}
+Appartements contain up to 4 ethernet wall sockets, for some appartements there's only one available. Usually these sockets have been labeled. Choose the socket you've connected the router to under the "socket" option accordingly.
-You can now open the file in a text editor of your choice.
-The MAC Address relevant to CSN is found under "macdsl" which you can then register in you CSN account.
-{{:anleitung:fritzbox_4040_support_datei_inhalt.png?600|Inhalt der Support Datei (macdsl ausgewählt)}}
-After the registration it takes about 20 minutes for your changes to be applied to your connection.
-Following this you can perform the quick setup of you Router.
+Under the device type you can select the type of device you're registering. (Router, Laptop)
+This setting does not have any meaningful effect. It's only of decorational use.
+After pressing "Apply changes" the access will be set up. This may take up to half an hour until completed.