Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- en:anleitung:tp-link-wr-841 [2020/11/24 20:19] – cleal
+++ en:anleitung:tp-link-wr-841 [2025/10/07 20:43] (aktuell) – Verlinkung Captive Portal tweish
@@ Zeile 1: / Zeile 1: @@
-====== TP Link WR841N ======
+====== TP-Link WR841N ======
 Connect the blue Port on your Router with the included cable to the RJ45 (Ethernet) plug in your wall.
-You are now able to connect to the WiFi from your Router and access the configuration interface of your Router in a browser (i.e. Google Chrome). To access the interface enter "192.168.0.1" into your browser's
+You are now able to connect to the WiFi from your router and access the configuration interface of your router in a browser (i.e. Google Chrome). To access the interface enter "192.168.0.1" into your browser's
 address bar.
-{{:undefined:tp_link_wr841n_login.png?600|Loginseite für WR841N}}
+{{ :undefined:tp_link_wr841n_login.png?600 |Loginseite für WR841N}}
 You are now able to login with username "admin" and password "admin."
-Please change the password of  this user immediately. You will find this under
+Please change the password of this user immediately. You will find this form under
 "System Tools => Password" as seen in the picture below.
-{{:anleitung:tp_link_wr841n_change_password.png?600|Passwort ändern auf TP Link WR841N}}
+{{ :anleitung:tp_link_wr841n_change_password.png?600 |Passwort ändern auf TP Link WR841N}}
-Please return to the status page. You will find the MAC-Address of your device in the section titled "WAN".
+The router can subsequently be registered via the [[captive_portal|Captive Portal]].
-Enter this address in the CSN webpage under "MyCSN / My Devices".
-{{:anleitung:tp_link_wr841n_mac.png?600|WR841N WAN MAC Adresse}}
+{{ :anleitung:captive_portal_en.jpg?600 |}}
-After the registration of you MAC-Address it takes about 20 minutes until the changes are applied to our system. After about 20 minutes you can start doing the "Quick Setup" of your Router.
+**The automatically detected MAC-address has already been filled in. Don't change it!**
+If the router has been wired up correctly, that's exactly the MAC address that needs to be registered.
-{{:anleitung:tp_link_wr841n_operation_mode.png?600|WR841N Operation Mode}}
+Appartements contain up to 4 ethernet wall sockets, for some appartements there's only one available. Usually these sockets have been labeled. Choose the socket you've connected the router to under the "socket" option accordingly.
+Under the device type you can select the type of device you're registering. (Router, Laptop)
+This setting does not have any meaningful effect. It's only of decorational use.
+After pressing "Apply changes" the access will be set up. This may take up to half an hour until completed.
+After about 20 minutes you can start doing the "Quick Setup" of your router.
+{{ :anleitung:tp_link_wr841n_operation_mode.png?600 |WR841N Operation Mode}}
 In the next step choose the operation mode "Wireless Router".
-{{:anleitung:tp_link_wr_841n_connection_type.png?600|WR841N Connection Type}}
+{{ :anleitung:tp_link_wr_841n_connection_type.png?600 |WR841N Connection Type}}
 Now choose the connection type "Dynamic IP".
-{{:anleitung:tp_link_wr841n_mac_clone.png?600|WR841N MAC Clone}}
+{{ :anleitung:tp_link_wr841n_mac_clone.png?600 |WR841N MAC Clone}}
-In the last step you should ensure that MAC-Address cloning is not enabled.
+In the last step you should ensure that MAC address cloning is not enabled.
 After you have completed the "Quick Setup" there are some more settings you should change.
-The first is making sure that the transmission power of your Router is set to the lowest level possible.
+The first is making sure that the transmission power of your router is set to the lowest level possible.
 For most students living in the dorms this should still be enough signal strength.
 If you and all of your neighbors comply with this the WiFi will be better for everyone.
 You will find this setting under "Wireless => Wireless Advanced".
-{{:anleitung:tp_link_wr841n_transmission_power.png?600|WR841N Transmission Power}}
+{{ :anleitung:tp_link_wr841n_transmission_power.png?600 |WR841N Transmission Power}}